Attic & Crawl Space insulation

Insulation Special Offer

$300 OFF On Insulation Removal + $350 OFF On Any New Insulation Installation

Get a free inspection for your attic & crawl space before the winter cold hits and take 20% off on Insulation removal, clean up & sanitation!

Call Now !
(206) 295-5925

Use KA2BUK coupon code to redeem this offer
(Subject to on-site inspection)

Home » Attic & Crawl Space insulation

ALWAYS AVAILABLE

LICENSED ENVIRSI815KB

WARRANTY MAINTENANCE

Local Attic & Crawl Space Insulation Services

When you’re searching for insulation removal or crawl space installation, you can trust the pros at Envirosmart Solutions. We’ll handle all of your insulation needs from start to finish including clean up to decontamination. And, as licensed contractors, our company can provide all the services you need. We’ll remove your dirty old installation and replace it with new insulation that’s clean and energy-efficient.

Our trained technicians will help you choose the best materials for you and your home. Plus, we’ll show you where to go to see if you qualify for rebates from PUD or PSE. And, there are many additional reasons for having new attic insulation installed or crawl space insulation installed, along with radiant barrier installation. These include moisture reduction, lower utility bills, and cleaner indoor air quality.

Call Now For A Free Estimate!
(206) 295-5925

Get Your Free Quote Fast

Fill out this form and we will contact you within 24 hours.

Our Services

Attic & Crawl Space Cleaning

Attic & Crawl space Insulation Installation & Removal

Vapor Barrier Installation, Repair & Replacement

Rodent Proofing & Clean up

Attic & Crawl Space Ventilation

Benefits of Good Insulation

There are so many benefits of having high-quality insulation installed by licensed professionals.

From blown-in insulation, batts insulation, rolls insulation, or spray foam insulation here are the top benefits.

Reduces your energy costs during all seasons
Gives you more even temperatures throughout your home
Prevents moisture condensation and mold growth
Reduces needed capacity and size of HVAC equipment
Property value is maintained and protected
Removes contaminants from rodents and pests
Gets rid of problems from old fiberglass insulation
Reduces noise level with a better acoustic performance
Protects health since old insulation crumbles into dust
Creates a cleaner attic and crawl space and cleaner air
Gives you more room for storage in crawlspace and attic

Attic & Crawl Space Insulation

Whether you need new attic insulation or crawl space insulation, we provide both services, including complete removal and installation.

It’s essential to have professionals like Envirosmart Solutions remove your current insulation because old insulation is full of contaminates from rodent waste and carry disease. It can also contain degraded fiberglass. That is not a job you want to do yourself.

Once we’ve completed the insulation removal (blown-in removal or batts insulation removal), we’ll install new clean energy-efficient insulation. And when we clean up, you won’t even know that we were there except that your energy bills will be lower, and the air you breathe with be cleaner.

100% Customer Satisfaction Guaranteed

Your Attic & Crawl space project is a significant investment. We understand that making the best decision today is crucial to your long-term home comfort and safety.

Our team of attic & crawl space expert technicians have extensive experience in Insulation, radiant barriers, ventilation, mold, vapour barriers, water drainage systems, and many more repair and installation services for residential and commercial customers.

We are licensed, bonded, and insured.

With our 100% customer satisfaction guarantee, we promise to provide you with a quality service and with no headaches – just peace of mind when it comes down to making sure everything will run smoothly from start to finish.

Choose Smart!

Types of Insulation

In addition to clean up and removal, including blown-in removal, and rolled insulation removal. And of course, we also install new insulation.

There are many types of insulation, depending on your needs. We’ll suggest the best materials for you.

Blown-in Insulation is sprayed into the attic, floors, and wall cavities using a blowing machine. This type of insulation helps the attic stay cooler in the summer and warmer in the winter.

Batts Insulation sometimes called blanket or rolls insulation can be installed in both the attic and crawlspace as long as there’s enough room. It’s used in walls, floors, and ceilings.

Spray Foam Insulation is used in floors, ceilings, unvented low-sloping roofs, and unfinished walls.

Radiant Barrier Installation

Radiant barriers are prevalent in our area and installed in the attic of homes. They’re mainly for cutting down cooling costs in the summer. The material doesn’t absorb heat – it reflects it.

A radiant barrier consists of super reflective sheeting material that reflects heat and lowers your HVAC costs and overall energy bill. In the winter, it works to keep heat in your home by preventing heat loss through your roof. And in the summer, it keeps the heat from entering your attic through the rooftop and making your home hot. We provide roofing insulation installation over your attic insulation to make it more energy-efficient. So, you can consider it super roofing insulation that will save you money on your utility bills and also keep your home at a more comfortable and consistent temperature. We are very experienced with radiant barrier installation. Read more about our radiant barrier installation services.

Our Reviews

They did a fabulous work cleaning out a crawl space/installing insulation/installing new dryer vent piping/rodent entry mitigation.

They responded very quickly and gave a competitive quotation to remove and replace attic insulation. The attic is now in excellent condition and smells clean and fresh. I highly recommend them

We had Envirosmart remove and reinstall insulation from a turn of the century home in Seattle. We were impressed with their removal process and thoroughness

Installation Removal & Installation Steps

The expert technicians at Envirosmart Solutions will provide you the professional results. We use the newest tools and machines to deliver high-quality insulation installation work. Here are our steps:

First, we’ll arrive at your house and start by clearing our workspace. We’ll cover any areas that need protection, including the floors, furniture, and walls.
Next, we will make sure all of our team members are aware of any special requests you may have. That keeps the job running smoothly and you happy
Now it’s time for old insulation removal from the space. We carefully place the blown-in removal or batts insulation into 42-gallon bags. After removal, we use a Shop-Vac to clean up all the remaining debris.
Next step is locating any air gaps between spaces. Once found, we’ll seal them. Then we sanitize and deodorize the area. That gets rid of germs, bacteria, and bad odors.
Now we will install the new crawl space insulation or attic insulation according to your preference and needs. From batts to blown-in, or spray foam, we do all types of insulation installation.
Our project manager will show you pictures of before and after and will go over with you on every detail to make sure you’re satisfied and got what you wanted

Our team of insulation removal, clean-up, and installation experts are reliable, arrive on time and do what they promise. We’re efficient so we get the job done quickly. Plus, our staff is super courteous and professional so you’ll enjoy working with us and trust us with your home.

How much does insulation installation cost?

The cost will depend on what type of insulation we install (rolls insulation, batts insulation, blown-in insulation, spray foam insulation) — also, the size of the area.

Why is attic insulation important?

High-quality insulation keeps your home’s temperature at a comfortable level and helps save you money on cooling and heating bills. Plus, it’s great for soundproofing.

Is blown-in or rolled insulation better for my attic?

It depends on how much space you have. Blown insulation gives a more consistent type of insulation and requires a blowing machine.

How are batts or rolls installed in the attic?

We carefully measure the spaces between the joists and walls studs on the floor of the attic and lay the pieces down to fit nice and snug.

Is there an attic and crawl space insulation crew up near me?

We cover all of Puget Sound including the following cities: Seattle, Arlington, Shoreline, Silverdale, Snohomish, South Hill, Southworth, Spanaway, Steilacoom, Sumner, Tacoma, Tukwila, Tumwater, University Place, Woodinville, Yelm, Auburn, Belfair, Bellevue, Black Diamond, Bonney Lake, Bothell, Bremerton, Des Moines, DuPont, Duvall, Everett, Federal Way, Gig Harbor, Graham, Issaquah, Kenmore, Kent, Kirkland, Lacey, Lakewood, Lynnwood, Maple Valley, Marysville, Medina, Mercer Island, Mill Creek, Monroe, Mukilteo, Normandy Park, Olympia, Orting, Pacific, Port Orchard, Poulsbo, Puyallup, Redmond, Renton, Sammamish, SeaTac.